Introduction
The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the " Arduino mini" with integrated USB. The "Arduino Nano" has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The "Arduino Nano" automatically senses and switches to the higher power supply, so there is no need for a power select jumper.

The nano's pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The DFRobot DFRduino Nano USB Microcontroller V3.1 (ATMega 328) can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Features
  • Automatic reset during program download
  • Power OK blue LED on the bottom
  • Green (TX), red (RX), and orange (L) LED
  • +5V to AREF jumper
  • Auto-sensing/switching power input
  • Small mini-B USB for programming and serial monitor (cable not included)
  • ICSP header for direct program downloads
  • Power OK blue LED on the bottom
  • Standard 0.1” spacing DIP (breadboard friendly)
  • Manual reset switch

Specification
  • Microcontroller: Atmel Atmega328-20AU
  • Operating Voltage (logic level): 5V
  • Input Voltage (recommended): 7-12V
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 8
  • DC Current per I/O Pin: 40 mA
  • Flash Memory: 32 KB (of which 2KB used by bootloader)
  • SRAM: 2 KB
  • EEPROM: 1 KB
  • Clock Speed: 16 MHz

Documents

Shipping List
  • DFRduino Nano x1
Specification
Baud Rate 9600 - 115200 bps
Connector Gravity
Output Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8
Power 5V
Memory
Flash(M) 32 KB (of which 2KB used by bootloader)
SRAM(KB) 2 KB
Motherboard
USB Mini B USB
Processor
Clockspeed 16 MHz

Write a review

Note: HTML is not translated!
    Bad           Good

DFRduino Nano (Arduino Nano Compatible)

  • Brand: DFROBOT
  • Product Code: DFR0010
  • Availability: In Stock
  • $99,500.00

  • Ex Tax: $99,500.00

Tags: DFRduino nano, arduino nano, DFR arduino nano

💬 Live Chat - Customer Service

Live Chat - Customer Service