Introduction
This 10 I/Os industrial PLC module(Optoisolated output) based on Arduino NANO provides a simple and cost-effective solution to the applications of industrial monitoring and control. It is easy to install and configure, and very flexible thanks to the Open Source-based hardware.
With standardized PLC connectors, the 10 I/Os module supports RS485, Ethernet, and optoisolated input / output, which could be well suitable for the monitoring, control and automation of your machines, alarms, elevator control, product lines, installations among the most typical applications such as fans, pumps, air conditioning, full HVAC solutions, control of AC and DC motors.
Features
- With 10 I/O interfaces
- Standardized connectors
- Supports RS485
Applications
- Control and automation of machines
- Control of AC and DC motors
Specification
- MCU: Arduino Nano
- Power Input: 12-24V DC
- Input Rated Voltage: 24V DC
- Rated Power: 30W
- Maximum Current:1.5A
- Clock Speed: 16MHz
- Flash: 32KB
- SRAM: 2KB
- EEPROM: 1KB
- Communication: USB, RS485, Ethernet
- Operating Voltage Range: 11.4~25.4V DC
- Digital Input: 3.3-24V DC(10Hz) / 220V AC
- Digital Isolated Output: 24V DC
- Working Temperature: 0℃~60℃
- Working Humidity: 10%~90%
- Storage Temperature: -20℃~60℃
- Ethernet Port
- RS485
- TCP IP
- Modbus TCP
- Modbus RTU
Documents
Shipping List
- 10 I/Os PLC Module CPU Arduino NANO (Optoisolated Output) x1
| Specification | |
| Baud Rate | 115200 bps |
| Connector | Gravity |
| Output | USB, RS485, Ethernet |
| Power | 12-24V DC |
| Range Output | 24V DC |
| Memory | |
| Flash(M) | 32KB of which 4KB used by bootloader |
| SRAM(KB) | 2KB |
| Motherboard | |
| USB | USB |
10 I/Os PLC Module - CPU Arduino NANO (Optoisolated Output)
- Brand: DFROBOT
- Product Code: DFR089
- Availability: Pre-Order
-
$2,066,500.00
- Ex Tax: $2,066,500.00
Tags: PLC Module, CPU Arduino NANO, IO PLC Module