introduction
This is the first PLC equipment based on the Arduino Technology designed for a professional use.
Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs, and 3 PWM digital isolated outputs. Meanwhile, it contains several communicate ports like, UART, I2C, SPI, RS232, RS485, Ethernet, which provide more flexibility to control your device. Besides, the controller offers the possibility to expand up to 127 modules via I2C.
This PLC can be programmed using the Arduino IDE and supports remote programming through the Ethernet port. Also you can continuously monitor the status for all the variables, inputs, outputs, etc. It is compatible with the Ardbox, M-duino and the Touchberry Pi with an instantaneous connection.
Board Overview
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
Features
- With 17 I/O interfaces
- Contains several communicate ports
- Supports remote programmin
Specification
- Mode Type: M-Duino
- Power Input Voltage: 12~24Vdc (Fuse Protection (2.5A) Polarity Protection)
- Input Rated Voltage: 24Vdc
- Rated Power: 30W
- Max Current: 1.5A
- Size: 101*701*119.5mm
- Clock Speed: 16MHz
- Flash Memory: 256kB of which 8kB for bootloader
- SRAM: 8KB
- EEPROM: 4KB
- Communication: I2C, Ethernet, USB, RS485, RS232, SPI | (2x) Rx, Tx (Arduino pins) Max232-Max485-W5500
- Operating Voltage Range: 11.4~25.4Vdc
- Operating Temperature: 0℃~60℃
- Operating Humidity: 10%~90% (No Condensation)
- Operating Environment: No Corrosive Gas
- Storage Temperature: -20℃~60℃
- Analog Input Voltage: 0 ~ 10Vac
- Digital Input Voltage: 7 ~ 24Vdc
- Interrupt Input Voltage: 7~24Vdc
- Expandability: I2C - 127 elements, serial port, RS485
- Analog Output Voltage (8bit): 0 ~ 10Vac
Documents
Shipping List
- M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output) x1
| Specification | |
| Connector | Gravity |
| Output | I2C, Ethernet, USB, RS485, RS232, SPI | (2x) Rx, Tx (Arduino pins) Max232-Max485-W5500 |
| Wi-Fi | Yes |
| Power | 12~24Vdc (Fuse Protection (2.5A) Polarity Protection) |
| Range Output | 0 ~ 10Vac |
| Memory | |
| Flash(M) | 256kB of which 8kB for bootloader |
| SRAM(KB) | 8KB |
| Motherboard | |
| USB | USB 2.0 |
| Processor | |
| Clockspeed | 16MHz |
M-DUINO PLC Arduino Ethernet 19R I/Os (Relay Output)
- Product Code: DFR0905
- Availability: In Stock
-
$5,964,000.00
- Ex Tax: $5,964,000.00