Introduction
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Sensor Interface:
- Red VCC
- Green GND
- Blue (Black) SDA
- Yellow (White) SCL
Specification
- Operating Voltage: 3.3/5V
- Communication Interface: I2C
- Protection Class: waterproof anti-condensation
- RH Response Time: 8s (tau63%)
- Accuracy: ±3% RH / ±0.3 ℃
- Measuring Range: 0-100% RH / -40-125 ℃
- Dimension: 73mm * 17mm / 2.87 * 0.67 inches
- Weight: 44g
Documents
- Product WIKI
- SHT20 Datasheet
Shipping List
- SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe) x1
- Jumper Wires 7.8" F/F x4
| Specification | |
| Accuracy | ±3% RH / ±0.3 ℃ |
| Baud Rate | 115200 bps |
| Cable Lenght | 30cm |
| Connector | Gravity |
| Output | Analog |
| Waterproof Grade | IP68 |
| Power | 3.3V |
| Range Output | 0-100% RH / -40-125 ℃ |
SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)
- Product Code: SEN0227
- Availability: In Stock
-
$378,000.00
- Ex Tax: $378,000.00
Tags: temperature sensor, temperature humidity sensor, humidity sensor